CTX-392 Multiaction

250 g multi-action tablets with simultaneous disinfection, algicidal and flocculant effects.

In one application, it removes bacteria, viruses and microorganisms from pool water in general; it prevents the growth of algae and keeps the water crystal clear.

Ideal for ceramic pools.

Only one product has a chlorinated disinfectant, flocculant and algicidal effect.
Along with the disinfectant, it also has a stabilizing effect on UV radiation.
Primary treatment: add 15 g CTX-200 / Gr ClorShock 55% dichloro granules per m3 of water.
After 2 hours, adjust the pH of the water to 7.2-7.6 using the CTX-10 pH Solid pH Adjuster or the CTX-20 pH + Solid pH Adjuster.

Maintenance treatment: after adjusting the pH of the water, add 1 tablet of CTX-392 MultiAction 250 g for every 20 m3 of water for 7 or 10 days.
These doses are recommended and may vary depending on the characteristics of each pool, the weather, etc.
The initial treatment (superchlorination) should be repeated whenever the water becomes cloudy.
Place the required dose of CTX-392 MultiAction in 250 g skimmers, then switch the devices to filtration mode to allow the product to dissolve by circulating water through the skimmers.
It is important that the entire volume of pool water passes through the pool filtration system on a daily basis.
The free residual chlorine content should be between 0,5 and 2 mg / l and can be easily measured with chlorine and a pH test kit.
These inspections should be carried out at least twice a day.
See also